Rosewill WIRELESS N ADAPTER RNX-N150UBE Guia do Utilizador descarregar pdf (Página 42)

CHAPTER 4: USING GROOV ADMIN

groov Box User’s Guide

Using an AR1 as a Wireless Access Point

groov’s SoftAP (Software Access Point) feature allows you to use your groov Box as an access point in

order to create a private wireless network with WPA2-PSK security. This is particularly useful for

connecting a phone or tablet to the groov App when there is no other wireless network available.

SoftAP can be used by any WiFi-capable device. Your groov Box can be connected to either a

wireless or Ethernet network.

In order to use SoftAP, you will need one of the following WiFi adapters:

• Netis WF2119S

• Netis WF2116

These are the only WiFi adapters tested and approved for this feature.

1. Follow the instructions on page 73 to install your Netis WF2119S USB WiFi adapter.

2. With the groov Box connected via ETH0, click the Configure Network Interfaces icon in Quick

Start.

3. Click WLAN0, and make sure that WLAN0 is Disabled. (To disable it, select Disabled next to IPv4

Address in the Boot Time Interface Parameters dialog box.)

4. Click the Wireless Access Point tab.

5. Next to Enable?, choose Yes to enable this feature.

6. Edit the following parameters as necessary:

– Static IPv4 Address—Use an IP address that is not on the same subnet as ETH0 or ETH1.

Make sure that WLAN0 is

Disabled

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 82 83

Sem comentários

Rosewill WIRELESS N ADAPTER RNX-N150UBE Guia do Utilizador Página 42