
eSATA-150 RAID External 2Ports Low Profile PCI Adapter RC-221 User Manual
8
4. Insert the Driver diskette. Press S, then press Enter.
5. Select Silicon Image Sil-3x12 SATA Raid Controller Driver and press Enter.
6. Press Enter to continue and follow on-screen instructions to complete
installation.
Add Windows 2000 Driver on Original Booting Device
1. After the SATA RAID PCI Host Adapter and attached drives are configured, boot
up Windows.
2. At the Found New Hardware Wizard, click Next.
3. Select Search for a suitable driver for my device (recommended) and click
Next.
4. Insert the Driver CD in your CD-ROM/DVD drive, check Specify a location,
uncheck the other boxes, click Next, type in E:\ (If your CD-ROM/DVD is E:\). Click
Browse.
5. Points specify a location, example E:\SATA Raid_2Port\ Sil3x12\ Win98_me
_2000_xp_nt4.0 \ Driver, click Open then OK.
6. If the Digital Signature Not Found message appears, click Yes. (Note If
prompted for Windows 2000 CD-ROM, insert the CD and click OK. Type in
E:\I386, click OK and Finish. (assuming E: is your CD-ROM drive))
7. Click Finish.
4.5. Windows Vista/XP Driver Installation
For New Windows Vista/XP Systems (Fresh Installation)
1. Before installation, copy all the files under directory E:\SATA Raid_2Port\ Sil3x12\
Win98_me _2000_xp_nt4.0\driver\ *.* to a blank floppy disk
2. After the SATA RAID PCI Host Adapter and attached drives are configured,
follow Microsoft procedures to install Windows accordingly.
3. At the Windows Set-up screen, press F6 in order to specify and add the driver.
4. Insert the Driver diskette. Press S, then press Enter.
5. Select Silicon Image Sil-3x12 SATA Raid Controller Driver and press Enter.
6. Press Enter to continue and follow on-screen instructions to complete
Windows XP installation. Note: When the Software Installation warning pops
up, click Yes. And when the Hardware Installation warning pops up, click Yes
again.
Add Windows Vista/XP Driver on Original Booting Device
1. After the SATA RAID PCI Host Adapter and attached drives are configured, boot
up Windows.
Comentários a estes Manuais