Rosewill RNX-N300 Guia de Instalação descarregar pdf (Página 3)

contact with your ISP. After that, please install the Router according to the

following steps. Don't forget to pull out the power plug and keep your hands dry.

1. Power off your PC(s), Cable/DSL modem, and the Router.

2. Locate an optimum location for the Router. The best place is usually near the

center of the area in which your PC(s) will wirelessly connect.

3. Adjust the direction of the antenna. Normally, upright is a good direction.

4. Connect the PC(s) and each Switch/Hub on your LAN to the LAN Ports on the

Router, shown in the following figure.

5. Connect the DSL/Cable Modem/Ethernet to the WAN port on the Router,

shown in the following figure.

6. Connect the power adapter to the power socket on the Router, and the other

end into an electrical outlet. Press the power switch, then the Router will start

to work automatically.

7. Power on your PC(s) and Cable/DSL modem.

8. When all of the devices boot up completely, make sure that the Router's

LEDs light as follows:

• Power LED: Light up

1 2 3 4 5 6 7 8 ... 11 12

Sem comentários

Rosewill RNX-N300 Guia de Instalação Página 3